BCFBS - T-GRADE MARKER INK, PIGMENT, WHITE
- MSDS: BCFBS
- Manufacturer: MARSH STENCIL MACHINE CO
- Product Name: T-GRADE MARKER INK, PIGMENT, WHITE
- National Stock Number: 7510-00N000283
Product Identification
Product ID:T-GRADE MARKER INK, PIGMENT, WHITE
MSDS Date:01/01/1985
FSC:7510
NIIN:00N000283
MSDS Number: BCFBS
Responsible Party
BELLEVILLE, IL 62222
US
Emergency Phone: 618-234-1122
Info Phone: 618-234-1122 OR 800-527-1351
Cage: 38512
Contractor
Telephone: 618-234-1122
Cage: 38512
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
OSHA PEL 100 PPM
NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: DE3030000
OSHA PEL 100 PPM
SILICA
RTECS: VV7320000
ACGIH TLV: 20MPPCF
LECITHIN WETTING AGENT
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Effects of Overexposure:DO NOT INGEST. AVOID EYE/SKIN CNTCT.
First Aid
First Aid:CONTAINS HYDROCARBONS. IF SWALLOWED, DO NOT INDUCE VOMIT.
CALL MD IMMED! EYE: IMMED FLUSH W/WATER AT LEAST 15 MIN, CALL MD.
SKIN: WASH THOROUGHLY W/MILD SOAP & WATER.
Fire Fighting
Flash Point:81F TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2
Fire Fighting Procedures:MFR SUGGESTS SAME AS PAINT
Unusual Fire/Explosion Hazard:COMBUSTIBLE. DO NOT USE NEAR FIRE OR
FLAME.
Accidental Release
Spill Release Procedures:ABSORB IN CLOTH OR SAWDUST. CLEAN W/NAPHTHA.
WASH W/SOAP & WATER, MFR REC.
Handling
Handling and Storage Precautions:DRY, INSIDE STORAGE. STORE BELOW 120F.
AVOID PROLONGED CNTCT W/SKIN OR BRHTNG OF VAPOR.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECTION IF INK IS
SPRAYED
Ventilation:LOCAL EXH & MECH VENT, YES
Protective Gloves:NO
Eye Protection:PROTECT AGAINST SPLASH
Supplemental Safety and Health
VAPOR PRESS NEGLIGIBLE. SPECIFIC GRAVITY 0.9-1.3. PROD ALSO CONTAINS
ZINC RESINATE & PETROLEUM RESIN.
Chemical Properties
Boiling Pt:B.P. Text:250F
Vapor Density:3.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NAPHTHA ODOR
Percent Volatiles by Volume:60
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATLS
Stability Condition to Avoid:STORAGE ABOVE 120F. AVOID OPEN FLAME.
Disposal
Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.